What’s here?

Welcome to “The Penguin Says,” the Linux application review site.

There are many sites providing links to Linux software, but very few that rate and review them. That is what you’ll find here. Although I fully support free software, you’ll find open and honest reviews here. If an application is a load of rubbish, or too flaky for real use, I’ll say so. But then, if it shows promise, I’ll mention that too.

You can find more about The Penguin Says here. When you read that text, bear in mind that it was written in the summer on 1998, before Linux became the ‘media-darling’ that it currently appears to be.

The reviews

Here is a list of all the Linux application reviews. Note that they are in alphabetical order rather than the order in which they were written.

• Abacus
• AfterStep
• BlackBox
• Cooledit
• FileRunner
• FreeCiv
• GIMP
• LinCity
• Linux
• LyX
• NEdit
• Netscape Communicator
• Psion Series 5
• SFM (Simple File Manager)
• Siag — Pathetic Writer
• StarOffice 4
• StarOffice 5
• tkCVS
• UAE
• WindowMaker
• WINE
• Corel WordPerfect
• WWWThreads

All reviews were performed on my Pentium 120 with 32Mb of memory, running RedHat 5.0 with all patches up to June 1998.

Introduction

The truth be known, I’m not a huge game player. But there are some games that even I seem to get hooked on. The first was Bomb Jack on my Sinclair Spectrum, circa 1986.

It took a while before I found Tetris and Lemmings, and then I started playing SimCity, Maxis’ classic city simulator. I wasn’t very good at first, but I stumbled on new ways of doing things and even read the manual occasionally.

SimCity was a massive success and has spawned a number of similar programs and sequels. It was only a matter of time before the free-software community took notice. LinCity is I. J. Peters version. I took a look at the X version (there is also a SVGA version).

Game Play

LinCity starts just in the same way as the original: create a new world or load an old one. Choosing the ‘new world’ option gives you a familiar, albeit not identical, screen. At the top right is the main map window; on the left is the tool bar; in the middle and below the main window are various graphs, statistics and the complete map.

In general the screen is clear and simple and uncluttered, the cities are well drawn and many items are animated. Some of the icons are not immediately obvious, but clicking on them with the right button brings up a help screen — very useful.

It works in roughly the same way as SimCity, too. You click on the building block in the left and the on the map to make it. Unlike SimCity, if you click on the representation on the map you get extra information about how much it’s being used.

Fortunately, LinCity is not a straight copy SimCity. SimCity starts off with the rather unrealistic assumption that when you start you are as technologically advanced as you’ll ever be. In LinCity you start with very basic technology and ‘learn’ new techniques as you go along — rather confusing if you’re used to the ‘real thing,’ but a worthwhile change nevertheless. (I suspect that this has come from Civilization.)

The finance section is also much more advanced than Maxis attempt. The Income / Expenditure section is split into eight categories: income tax, coal tax, goods tax, export tax, other costs, unemployment costs, transport costs and import costs. This makes things a lot more complex. In SimCity not much work just tends to lower the population. In LinCity it lowers the population and costs you in the ‘unemployment costs’ part. (My cities always seem to have crippling unemployment and rapidly become bankrupt!)

Difficulties

I think that most of the problems I have with LinCity are because I’m so familiar with SimCity. The connections between some many events are different, and in LinCity are dependent on the technology level as well as the environment — looks like it could be an entertaining game long after you get bored of the real thing.

There are some annoying bits, though. Why, for example, is the window of a fixed size? Couldn’t we have something more like SimCity for Windows where all the various bits are re-sizable, independent windows? It is very apparent that the SVGA version came first and that the X version is, basically, that in a window. Hopefully version 2 will drop the SVGA version — how many machines are incapable of running X these days?

Why do some items have roads that go only into one corner? (I had a completely useless ore mine for a number of years, wondering why ‘they’ weren’t using it.)

The online help is very useful — you can right-click most things to get a description and some suggestions as to how you can use them best — but a full users guide is missing. It would be nice to be able to print out the guide and plan your city before you sit in front of your machine. This is difficult if you can’t remember how building a windmill effects a farm.

Overall

LinCity is a great addition to the library of anyone with a Linux machine. It’s a well done, entertaining game that, rather than simply cloning the original version, has added a number of its own innovations.

Introduction

Linux seems to have many word processors, text editors and email programs, but other office applications seem to be rather thin on the ground. I’ve been looking for a decent spreadsheet for sometime as I have to switch back to Windows to use Excel every time I want to use one!

For all it’s faults, Microsoft Excel is a superb application and any other spreadsheet is going to have to try and compete with it at some level. I hoped Abacus would be it…

Installation

I normally prefer my applications to be available in RPM format, but if I can’t a GNU autoconf script is a fine substitute. Abacus, it would seem, has neither. It took far too much work to get it to run.

The main problem is not with the code, but with the documentation — there isn’t any in the distribution! I typed make to see whether it would work. Surprisingly, most of it seemed to run okay. It couldn’t find ‘yacc’ on my PC, which is quite reasonable as I have Bison instead. I loaded a few of the makefiles until I found the reference to yacc and changed it to ‘bison -y’ to force Bison to emulate yacc. This didn’t work either — it complained about some problems with the grammar. (I thought that Bison was upwardly compatible with yacc?)

I’d had a long day, so I was getting ready to pack the whole thing in as a bad job. After a strong coffee I decided to continue. I dug around for my RedHat installation disc and installed byacc and changed all the references from Bison back to yacc. This time it worked.

This was not the end of the installation problems, though. Typing ‘abacus’ resulted in the following error:

.//abacus: /tcl_interf/nxlc: No such file or directory

Again, someone without any development experience wouldn’t have realized that this meant that an environment variable hadn’t been set (it was expecting a pointer to the Abacus home directory). A quick scour through the source revealed that I needed to set ABACUS_HOME.

But even this didn’t solve the build problems! To cut a long story short, it was looking for a file called ‘version’ so it could display its version number when it started. (The distribution does have a symbolic link called ‘version’ but it doesn’t point at anything.) Having created the file, Abacus starts. Finally.

In use

Abacus starts with a splash screen with a professional looking logo. When the main screen appears, disappointment sets in. The majority of the screen is filled with a grid — what did you expect, it is a spreadsheet — while the top has the menu bar and a random assortment of garishly coloured controls scattered around.

When I first test a spreadsheet program, I usually create a few random numbers, total them and create a graph of some of the numbers. This covers much of the functionality that I use on a day-to-day basis and gives me a good impression of how easy it is to use. For the sake of comparison, it took me about two minutes in Excel 95, most of which was me playing about with some of the many options.

It took more than two minutes with Abacus. As I’ve been brainwashed in the ways of Microsoft, I entered what I thought was an appropriate formula for a random number: =rnd. While I now accept that this wasn’t the right formula, I still fairly certain that it shouldn’t have core dumped claiming that there had been a segmentation fault.

I never did find how to create a random number. I looked in the ‘function’ dialog box. There was a RAND function which sounded right, but whenever I selected it, Abacus added a quote at the front making it text rather than a formula. I’m not sure what was going on there.

Having given up on the random numbers, I entered some numbers manually and summed then using the AutoSum button on the tool-bar. After my experience up to this point I was surprised when it worked as advertised. You have to use it in a call immediately below or next to the cells you want to sum, unlike Excel, but I think I can live with that.

Next test: graphs. Step one: select the numbers. (Fine.) Step two: select ‘New graph’ from the menu. (Fine.) Step three: select the type of graph from the resulting dialog. (Fine.) Step four: draw out the area you want the graph to be drawn in. (Not so good.)

For the last step, the computer changed the mouse pointer to half a set of cross-hairs and seemed to forget about the graph. Left clicking the matrix didn’t do anything. Right clicking produced a run-time error from TCL.

Conclusion

I have to say at this point that I suspect that I hardly touched the surface of Abacus’ functionality. It may not seem reasonable to criticize a program having just a cursory look, but if the program is not easily capable of doing the very basic functions that I need I see no point in looking further. Numbers, formulae and graphs are the staple diet of any spreadsheet user and Abacus seemed to hinder any progress on this front.

Unfortunately, it looks as though I’m going to have to continue returning to Windows and Excel when I want to use a spreadsheet. Although Abacus is fully featured, it has more than enough annoying quirks to send me running away even if I discount the stability problems that I encountered.

However, it does show promise. Recode the user interface in C instead of TCL and write some documentation and it may be a winner.

Why?

I’ve been using Linux since 1994, just after the first non-beta release version of the kernel came available (I think it was 1.0.9, but don’t quote me on it). In the early days I was a bit lost, I didn’t know much UNIX and I didn’t know much about the web, so I stuck to using the packages that came with the Slackware distribution. (At the time I didn’t need much more than the core development tools, anyway.)

Since then, I’ve got to know more about UNIX, Linux and the Internet and have started downloading and looking at a number of applications. Some of them are fabulous, others aren’t worth the time or bandwidth. But how should I know which is which?

As far as I can tell, there isn’t a way. Although there are loads of sites with links to programs and applications, there doesn’t seem to be anywhere that reviews and rates them. Until now.

The task ahead

There are thousands of programs out there, and all of them have a new version popping out once a month or even more frequently. How can I keep up?

I can’t. So, we need some ground rules:

1. I’m not going to review everything. I want to promote Linux as a usable operating system, so, in the main, I’m going to look at ‘user’ programs — word-processors, web browsers — rather than the new version of GCC.
2. I’m not going to review every release. I’m not even going to update old reviews. Each review will have a version number attached, leaving the user to decide whether it’s up to date enough to be relied upon.
3. You’re going to help me! If you’re interested in helping, mail me.

Logo

‘The Penguin Says’ logo isn’t really mine. I took one of the logo’s found on Andreas Dilger‘s page and changed the wording (using Paint Shop Pro — I would have done this using the GIMP, but PSP is much better at resizing images). The Penguin was originally drawn by Larry Ewing, the logo ‘concept’ by Allen Petlock. I hope they don’t mind.

Me

I’m Stephen Darlington. I’ve been using Linux for a number of years now, and various forms of free software for much longer. This is my vague attempt to put something back — I spend all day writing computer programs so the last thing I want to do in the evening is more! I can, however, manage to bang a few words together.

Introduction

Many people believe that wine gets better as it gets older. This, however, is only partly true. Some wines taste much better young and all go bad eventually.

What does this have to do with Linux software?

Well, AfterStep is my window manager of choice (see my review of BlackBox for a discussion on what a window manager is) but, more because of laziness than anything else, I’ve been using version 1.0. I never got around to upgrading, but since I was going to do a review I figured that I’d better move to release 1.4 — the latest stable version.

Perhaps I’m getting old; perhaps it’s inertia of some kind; perhaps I just haven’t given 1.4 a chance to prove itself; but I prefer good old 1.0.

What is AfterStep?

I’m getting ahead of myself here. What is AfterStep?

Fairly apparent from the title, it’s a window manager that tries to look and feel like NeXTstep, Steve Jobs rather fabulous follow-up to the Macintosh.

Version 1 took that quite literally. It had a dock (“wharf” in AfterStep-speak) to the right of the screen, pop-up menu’s and gradiated title bars just like the NeXT machine. The dock is a column of large coloured icons that can either launch applications, shrink an application such as xload to display useful information, or both. It’s now in a number of other window managers, notably WindowMaker, but AfterStep was there first. 1 had little else — simple but effective.

For later versions, the authors obviously thought they needed to add stuff. (They seem not to subscribe to the ‘perfection is not when you can add nothing, but when you can take nothing away’ school of thought.) 1.4 takes the basics and adds more docks, more furniture on the windows, themes and support applications.

Installation

You know me by now — basically capable, but lazy. Rather than grab the source, I downloaded an RPM file and upgraded from 1. I expected 1.4 to take all my current settings, but it didn’t quite work like that.

In fact, the first time I tried it didn’t work. XDM simply flashed out of existence for a second and then reappeared.

Okay, dive back in as root and read the documentation. What’s needed is a GNUstep directory that can be copied from a shared directory. It’s not difficult and it is documented, but why can’t AfterStep do it for you? And how much do I have to copy? My home directory now have loads of icons in it — don’t think /home can put up with so much detritus for long.

And copying lots of configuration data from a central location meant that all my setting from 1 were lost. I’d quite like my old settings back, please.

In Use

It took me a while to get AfterStep to how I like it. I wanted a single dock filled with my favorite apps, a clock, resource monitor and something to track my PPP connection to the Internet. It’s all in a configuration file (much like AS1 but in a different place) the basics of which are relatively simple. I think I’ll use the separately available configuration program for anything more complex.

1.4 seems to have a much greater emphasis on multiple desktops, so much so that in the default configuration there are 16 of them! It’s quite neat that they can be split into categories rather (the defaults are Work, WWW, Mail and Games), but I suspect that most people would run out of memory before they run out of desktops. Personally I’ve never got used to multiple desktops and usually just have one very busy one.

Overall

Much in the same way that people use Windows because they don’t know anything better exists, I’ve used AfterStep for well over a year. I thought doing this review would kick start me into using something newer and better.

It didn’t. In many objective ways the newer version is an improvement. It looks better, it’s more configurable and more easily configured and it’s more standard. But something is missing. It doesn’t seem to be a huge improvement over 1, yet has a much larger memory foot-print and popular support is waning in favour of WindowMaker which seems to be advancing much more quickly.

So, sorry guys, but I’m sticking with version 1 and am very tempted to take a look at some alternatives.